SVC Voice Changer

SVC Voice Changer #

so-vits-svc is one of simpler voice changers to set up on Linux. It can run on CPU as well as NVidia and AMD GPUs.

This is an exert of the original README.md of the GitHub repository, intended for people who are as bad with Python as I am.

Setup #

Disclaimer: There’s probably a better way. I’m not good at Python. Or machine learning.

Prerequisites: #

Install the following packages using your distro’s package manager:

  • Python 3.10
  • Pip for Python 3.10
  • Virtualenv for Python 3.10

Please use 3.10 exactly, not newer or older.

Create virtualenv: #

In this example, we will create the virtualenv inside ~/.var/venv/. Feel free to change the location, any folder will work.

Create virtualenv:

mkdir -p ~/.var/venv/svc/
cd ~/.var/venv/svc/
python3.10 -m venv .

Activate virtualenv

  • On fish: . bin/activate.fish
  • On csh: . bin/activate.csh
  • On bash/zsh: . bin/activate

At this point, if you call python or pip, you will be running that command inside the virtualenv.

You can activate the virtualenv again by cd ~/.var/venv/svc/ followed by the activate command for your shell.

To exit the virtualenv, run deactivate.

Install SVC #

Do these while you have the virtualenv activated.

Install required tools:

  • python -m pip install -U pip setuptools wheel

PyTorch with CUDA support for NVIDIA GPUs:

  • Please install CUDA 11.8 using your system package manager. Newer versions may not work.
  • pip install -U torch torchaudio --index-url https://download.pytorch.org/whl/cu118

PyTorch with ROCm support for AMD GPUs:

  • Please install ROCm 5.7.1 via your system package manager. Newer versions may not work.
  • pip install -U torch torchaudio --index-url https://download.pytorch.org/whl/rocm5.7

PyTorch for CPU only (you can also choose CPU mode with the options above):

  • pip install -U torch torchaudio --index-url https://download.pytorch.org/whl/cpu

Finally, install SVC:

  • pip install -U so-vits-svc-fork

Launch the GUI #

You can start the graphical UI by running svcg inside the virtualenv.

Example start script for bash:

#!/usr/bin/env bash
. ~/.var/venv/svc/bin/activate
svcg

Models #

Grab a model from HuggingFace (link on top of page). Models that work with this setup are the ones tagged with so-vits-svc-4.0 or so-vits-svc-4.1.

You will need 2 files for SVC to work:

  • G_0000.pth where 0000 is some number. Usually a higher number means better, but only if you’re comparing files within the same repository.
  • config.json tells SVC how to use the pth file.

With SVC running, plop the G_0000.pth into Model Path on the top left, and config.json into Config Path.

Starting the Voice Changer #

Default settings usually work OK. What you want to change is Pitch. This will be different depending on how high your own voice is compared to the model’s voice. You will need different Pitch setting for different models.

Check Use GPU on the bottom center if you want to torture your GPU with your voice. It better not complain for how expensive it was.

Click (Re)Start Voice Changer to do just that. You also need to click this after changing any settings.

PipeWire Setup #

This is for ALVR-only right now. TODO the rest.

Use qpwgraph or helvum to:

  1. Disconnect vrserver from ALVR-MIC-Sink.
  2. Pipe the output of vrserver to the input of Python3.10.
  3. Pipe the output of Python3.10 to the input of ALVR-MIC-Sink.